Versatile coal tar coating for use in immersion, splash and spillage, chemical fumes and below-grade environments.
High-build corrosion resistant coating providing one coat protection for concrete and steel in a variety of chemical, immersion and underground conditions. Also, when a two-coat application is desired, a low film build option is possible.
Tightly cross-linked epoxy with excellent corrosion and chemical resistance. Principally used for immersion services, including fuel and crude oil storage, fuel pipelines, pressure vessels, chemical containment and wastewater treatment.
Glass-reinforced, flexible epoxy mortar basecoat for bridging small substrate cracks in secondary containment concrete structures. Replaces mortar/slurry basecoat for Series 237SC, 239SC, and 252SC when a flexible basecoat is desired.
A highly chemical resistant, multi-purpose resin for fiberglass reinforced mat (65 mils) or mortar/fiberglass reinforced mat (125 mils) secondary containment systems. Protects against harsh chemicals, thermal cycling, impact and abrasion.
A chemical resistant primer for use with Series 252SC secondary containment system. Note: Contact your Tnemec representative or Tnemec Technical Services with specific chemical exposures.
Chemical- and abrasion-resistant elastomeric membrane with exceptional strength and flexibility. Ideally suited for environmental requirements of waste containment for primary or secondary containment. Spray applied, it forms the monolithic, impermeable liner required for earth collection and catch basins, decorative ponds and fountains, reservoirs, cooling towers, dams and spillways.
Flexible liner providing a seamless monolithic membrane for use in potable water basins, steel tank floors and reservoirs. Also for areas requiring impermeability such as decorative ponds and secondary chemical containment.
A versatile, high-build, epoxy internal lining applied in a single coat by plural component equipment. Its enhanced chemical resistance and physical properties make it an excellent, cost-effective choice for corrosion control in tanks handling brine water, drilling mud, mild temperature backflow, and a wide range of chemicals used in the oil and gas industry. Series 307 contains micro-fiber reinforcement for enhanced film integrity.
A convenient, easy to use touch-up kit, ideal for small repairs and holidays. Packaged in a two-part dispenser tube that separates resin and hardener and is applied using a high-thrust ratio applicator. Compatible with all Tank Armor products.
An advanced generation, solvent-free, high build epoxy lining for the interior of steel storage tanks and vessels from various cargos including non-potable water, crude oil, diesel fuel and other refine petroleum products. Also used to line concrete basins, troughs, and tanks where a coating resistant to chemicals, fuels, and domestic wastewater immersion service is needed. Note: Series 322-1241 can be used with mat to create a reinforced laminate system excellent for use over heavily pitted internal tank bottoms. Contact Tnemec Technical for additional information.
Internally reinforced, 100% solids epoxy lining that provides protection against corrosion and chemical attack. Specified for use as a protective lining in finished fuels, sweet/sour crude, and brine immersion exposures for above-ground and transport tanks, and pipelines. Series 335 provides long-term durability and corrosion control for extended service life. Also recommended as a liner for tanks and transports containing DEF (Diesel Exhaust Fluid). Contact Tnemec for more information.
A thick-film epoxy formulated for corrosion control and internal lining of petroleum storage tanks. Lining may also be used for select chemical storage tanks. Refer to the Tnemec Chemical Resistance Chart.
A high-build, tightly cross-linked, high-performance epoxy with excellent resistance to a broad range of chemicals, solvents, and petroleum over a wide range of temperatures. Refer to the Series 350 Chemical Resistance Guide for more information.
An epoxy lining formulated for corrosion control and aggressive chemical immersion in pressurized vessels, pipelines, storage tanks, industrial wastewater, etc. Series 370 exhibits superior resistance to a wide range of chemicals with excellent physical properties for long term durability and service life, and offers convenient airless spray application for both field and shop. Contains micro-fiber reinforcement for improved film integrity. Note: Application, environmental and design factors, chemical temperatures, and chemical mixtures can significantly impact coating performance, so due care should be exercised in the selection and use of the coating. Contact your Tnemec representative to review full project details before coating is selected.
An internal epoxy lining formulated for aggressive chemical immersion and corrosion control of chemical tanks. Contains micro-fiber reinforcement for improved film integrity. Series 391 exhibits superior resistance to a wide range of chemicals, acids, and fractionation blends with excellent physical properties for long-term durability and the service life of transport and storage tanks. Contact Tnemec for more information.
A thick-film reinforced epoxy internal lining formulated for corrosion control and abrasion resistance in milling and process environments, chemical plants and refineries. Allows for ultra high-build application of 125 mils DFT. Series 396 exhibits superior corrosion and abrasion resistance for pipelines and process and storage tanks.
A two-component, fast-setting, monolithic coating designed to provide a durable polyurethane lining in a single-coat, multi-pass spray application applied with plural component equipment. This high-performance coating has excellent chemical, thermal shock, and abrasion resistance. It is ideal for application to steel or concrete in water and wastewater treatment, secondary containment, and for tank linings and bottoms. Recommended for immersion service. Note: All orders are subject to approval based upon project scope, applicator qualification, and appropriate equipment configuration.
A 100% solids, abrasion-resistant lining specifically designed for wastewater immersion and fume environments and exposure to corrosive soils. Provides low permeation to H2S gas, protects against MIC and provides chemical resistance to steel, ductile iron pipe and fittings for severe wastewater or buried exposures. A coal-tar free, resin-rich formulation with low pigment volume concentration (PVC) for maximum performance.
A 100% solids, hybrid epoxy mortar designed for severe wastewater immersion and fume environments. Specifically formulated to withstand high levels of hydrogen sulfide gas (H2S), sulfuric acid (H2SO4), as well as other gases common to sewer exposures and severe wastewater environments. Aggregate reinforcement provides additional resistance to abrasion and impact.
A versatile, thick film, 100% solids, abrasion-resistant lining specifically designed for domestic wastewater immersion and fume environments. Series 435 provides low permeation to H2S gas, protects against MIC and provides chemical resistance to severe wastewater environments. Contains micro-fiber reinforcement for improved film integrity.
A thick film, 100% solids, spray-applied, an abrasion-resistant coating designed for domestic wastewater immersion and fume environments. Provides excellent resistance to H2S gas permeation, protects against MIC, and provides chemical resistance to severe wastewater environments. Fiber reinforcement provides superior physical strength and higher film build.
Series 1402 is a food grade, vinyl ester primer for complete FDA-compliant lining systems in concrete, steel or stainless-steel tanks. Fast-cure characteristics allow for quick application of subsequent coats, limiting downtime and facility disruption. Series 1402 is the only approved primer for the ProPolymer food grade product line. Replaces ProPolymer 4808.
This corrosion resistant resin is used as the base product for many reinforced applications due to the versatility provided from the product being supplied as “neat” or non-pigmented. A versatile selection for many secondary containments and process floors, Series 1415 is best for caustic and high-ph applications, and when used as the base material for silica-free systems. Use with specialty mortar powders, to embed glass mats, as a saturant coat or as a pigmented self-leveling finish coat. Series 1415 was formerly ProPolymer 4860.
This extremely corrosion resistant coating is used as the base product for many reinforced applications due to the versatility provided from the product being supplied as “neat” or non-pigmented. Series 1416 is the best selection for strong acid conditions and when temperatures above ambient conditions are expected. Use this product to add specialty mortar powders, to embed glass mats, as a saturant coat, or as a pigmented self-leveling finish coat. Combine with LavaCrete Part C aggregate to create an enhanced corrosion resistant polymer concrete. Series 1416 was formerly ProPolymer 4847.
Resistant to very high temperature service and extremely corrosive environments, this coating is used as the base product for many reinforced applications due to the versatility provided from the product being supplied as "neat" or non-pigmented. Series 1418 is the recommended selection for use in the most chemically demanding environments, such as, wet or dry FGD scrubbers, ductwork and slurry tanks operating in elevated temperature conditions. Use with specialty mortar powders, to embed glass mats, as a saturant coat or as a pigmented self-leveling finish coat. Series 1418 was formally ProPolymer 4847HT.
Series 1420 is an FDA-compliant, trowel-grade vinyl ester lining suitable for direct-food contact in tanks and vessels. Glass-flake reinforcement provides additional abrasion and permeation resistance in wet slurry or immersion service environments. Series 1420 may be used as a stand-alone lining system or with a gel coat in a multi-coat system. Replaces ProPolymer 4855T.
Series 1422 is an FDA-compliant, trowel-grade, high temperature lining suitable for tanks and vessels in food grade service environments or where high temperature conditions are required. Highly filled with glass-flake, it is specially formulated for exceptional service in thermal cycling and chemical reaction vessels. Replaces ProPolymer 4865T.
An enhanced elevated temperature, novolac vinyl ester, filled with specially treated premium glass flakes. This product has outstanding trowel application properties. Series 1428 is ideal for the rehabilitation of heavily corroded steel substrates and for high film build protection in the most demanding chemically active and corrosive environments. Series 1428 can be used in FGD units for time saving, quick repairs on small areas or used as a complete lining. Formerly ProPolymer 4875T.
Series 1430 is an FDA-compliant, mineral flake-filled vinyl ester lining for food grade tanks, vessels and other structures. Applied by spray or roller, it can be used as either a stand-alone lining system or as a topcoat for added protection over trowel applied vinyl ester linings. Replaces ProPolymer 4813S.
Series 1432 is an FDA-compliant, vinyl ester lining for food grade tanks, vessels and other structures. Highly filled with glass flake, Series 1432 is specially formulated to provide exceptional service in thermal cycling and chemical reaction tanks and vessels. Applied by roller or spray, it may be used as a stand-alone lining system or as a topcoat for added protection over trowel applied vinyl ester linings. Replaces ProPolymer 4822S.
A high molecular weight (HMW), elevated temperature-service, glass-flake-filled novolac vinyl ester lining. Can be used as a gel coat, as a stand-alone liner or as part of a full vinyl ester system. Commonly used in high temperature filtration units, bag houses, exhaust and duct work, and as a primary lining for wet chemical services. Formerly ProPolymer 4834S.
A high-build, novolac vinyl ester, glass-flake filled lining with an enhanced elevated temperature resistance in dry and wet corrosive environments. Series 1438 is ideal for use in flue gas desulfurization (FGD) units, hot duct work, and wet and dry absorbers. Also an outstanding primary lining for many challenging chemical immersion services. Formerly ProPolymer 4844S.
An elevated temperature service, high-build novolac vinyl ester, with a proprietary blend of abrasion resistant powders and ceramics. Series 1439 is ideal for use in high wear, high air velocity with heavy particulate suspension and on impingement areas. Series 1439 is an outstanding selection for use in abrasive slurry lining services. Formerly ProPolymer 4844SAR.
Continue Exploring in the color tool
When you finish selecting, request your Swatch Packet below. Expect your swatch cards in 5-7 business days. Contact your expert Sales Rep at any time.
You can use our Color Tool page to explore our available colors and request swatches of colors you like.
Sorry, there is a maximum of 6 color swatches.